How do I enable PPPoE on the Motorola?


If you have a DSL modem and you are not using a router, you may need to enable PPPoE on your Motorola adapter.

Using a computer connected to the PC port of the Motorola, open a new internet browser window. In the address bar type in 192.168.102.1 and press Enter. This will take you to the management interface for the Motorola.

Go to the Basic Configuration page. Select "Enable PPPoE". Type the Service Name, User Name, and Password provided by your DSL provider.

Click "Save Changes" at the bottom of the screen. It will prompt you to reboot the device. Click "Ok". This will save your PPPoE settings on the Motorola.


Back to FAQ's

Voice Over IP:


Residential & Business:


Hosted PBX/VoIP Systems:


Contact Information:





The Domatic ATA (Analog Telephone Adaptor) brings traditional telephones to the networked world. It is a handset-to-Ethernet adaptor that interfaces regular analog telephones with IP-based telephony networks. The Domatic ATA supports two telephone lines.